HZSY(Hua Zheng Shang Ye) Building Co.,ltd Flexible Wall Tile is a new kind of decoration material, it's instead of traditional Glazed Ceramic Tile, As it's lightweight, soft, energy-saving, fireproof, more colorful, high-quality, long life-time with 70years. It adopts natural modified mineral powder as aggregates, green plant fiber and other natural polymers as reinforced materials, and is formed through light enzyme irradiation reaction. The whole production process realized zero emission and zero pollution. It is rea new environmental material, which can be widely applied to various architecture, thereby saving energy, recyclable, obtaining from nature and return to nature.
Since some clients still are new to this product, we will introduce flexible wall tile installation guide as below;
Construction Procedure
Basic treatment.
Trial place, flip line.
Scraping the adhesive to the wall as a comb shape.
Scraping thin layer of adhesive on the back of the product.
Paste products, more press, on-line, flatten, brush seam.
Using special grouts caulking.
Finished products cleaning, conservation.
Construction Accessories and Tools
Construction Method of HZSY Flexible Wall Tiles ¨C Split Bricks Series
After primary treatment, setting line for positioning.
Use sawtooth trowel to scrape prepared HZSY flexible wall tiles adhesive on the back of the tile, slurry thickness 2-3mm, full slurry ratio must be more than 80%. Please do not put too much slurry at tile edges, easy for hands to carry and avoid to dirty hands.
Move up and down evenly of the tile with both hands, adjust the seam width, make the tile can uniformly contact with the wall, and tapping it with rubber plate to make the adhesive uniform. Pressing with fingers is not allowed.
Filling, using HZSY soft ceramic pointing agent or silicone rubber to fill all the seams.
Pointing, when pointing agent or silicone rubber is semi-dry, use the matching pointing steel bar to pull the joints, the joints should be deep, saturated and smooth.
Cleaning the wall surface, using shovel to eradicate the pointing agent, then use dry sponge to remove the ashes.
Construction Method of HZSY Flexible Wall Tiles ¨C Stone Materials Series
After basic level processing, setting line for positioning.
Use the sawtooth trowel to scrape 2-3mm thick HZSY flexible wall tiles adhesive on the wall, and the width is best within your arm length.
Move up and down evenly of the tile with both hands, adjust the seam width, and tapping it with rubber plate to make the adhesive uniform.
After adhesive is semi-dry, use the steel bar to point joints.
For the overflow adhesive, when it is semi-dry, using a shovel to take it out.
Using a dry sponge to remove the ashes.
Construction Method of HZSY Flexible Wall Tiles
Pointing, when pointing agent or silicone rubber is semi-dry, use the matching pointing steel bar to pull the joints, the joints should be deep, saturated and smooth. If use the stainless steel bar, tear the surface film off after the free nail glue dried.
Clean its surface dust with a dry sponge.
Construction Method of HZSY Flexible Wall Tiles
After primary treatment, settling line for positioning.
External Corner, Hitom Angle Processing
For the chamfering place, basic level should be flat. Product both sides keep 1-3mm distance from the corner, convenient for pointing.
Fill in the seams with pointing agent or silicone rubber.
Use the matching pointing agent or silicone rubber, upon semi-dry, use the small shovel to eradicate.
For overflow pointing agent or silicone rubber, upon semi-dry, use the small shovel to eradicate.
Use a dry sponge to remove the ashes.
45¡ã Chamfer Processing
Use a small grinder to grind a 45¡ãangle at the edges of two flexible wall tiles which are going to connect together.
On connection place, adhesive should be fully filled, use hands to compact evenly two pieces products.
If any seams in connection place, need to use same color sealant to fill to the full.
After the slurry is dry, use a grinding wheel or same color product to grind the corners, and make them round and smooth.
Cleaning and Maintenance Methods
Workers must keep their hands clean before pasting. If any slurry pollute the product surface, upon semi-dry, use the shovel to eradicate, wet rubbing is strictly prohibited.
When slurry pollute your hands, please stop the construction and immediately wash your hands; if dirty the products, upon semi-dry, use the shovel and dry sponge to clear up. Cleaning by water is prohibited.
